[Preorder Ends, During Production] Book Loving Princess Old School Princess Enamel Pin 1
This is the first design from our “Old School Princess Nouveau Bijoux Collection” featuring popular classic princesses and heroines from our Childhood Fairytale Story line-up From Andersen Fairy Tales and Grmm’s Fairy Tales.
This collection will consist 6 scenes for book loving princess
Pins from this collection will have Art Nouveau as key style, incorporating gothic/baroque/Rococo/Plique-a-jour/Sculpting etc.
They will be on average about 4.5” to 5” Pin-on-Pin with 3D Sculpted Mould.
On top of traditional enamel pin technique, we may also incorporate other special effects creatively to achieve collectable deluxe art piece.
PRODUCTION VOLUME:
LE45 for each variant (20/variant available at preorder)
SPECIFICATION:
4,53” (11.5cm)
3D Sculpted Pin-on-Pin
Bi-Colour Plated
Stainless Effect
Sandblasted
Glitters
Silkscreen Printing
Back Stamp
*Bonus techniques as additional surprise (we will not charge preorder and subscription collector bonus techniques)
DISCLAIMER:
We are artists who draw from scratch and design our own art into pinart as well as vector proofing them. In terms of designs with 3D effects, we also make 3D modelling.
Pre-colour filing line-art vector file is always verified by our long term cooperating menus before any design reveal. All of our design reveals are pin arts with only effects we are confident of achieving in the final products. We may upgrade final effects when new tech is achieved through our constant R&D.
PRODUCTION TIME:
We start to make vector files prior to the preorder to save time. Our LE pins will usually take 2 to 3 months to complete. But with extra cautious, please consider 6 MONTHS as normal guideline time of fulfilment (Shipped out with either tracking number or proof of shipment if untracked is selected).
We’ll closely post production progress to keep you updated, and updating guideline timeline based on progress where necessary.
Potential delay is mainly due to following reasons:
2 are OCD perfectionist who want to make every little part perfect, some more complex techniques might take longer for colour fitting or size fitting, hence lead to delay. We will closely monitor and update progress for each product.
Some uncontrollable external circumstances can change, hence cause under satisfied batch from our long-term cooperating manu. Al though we strictly stick to the high quality manus, which has low flaw rate. But even with them we’ve encountered underperformance due to factory surrounding change, e.g. construction, which generates dust which is lethal to pin production.
Pins, therefore, will have to be fixed or remade before we can deliver.
International shipping is not within our control once they are out of our hands. In case of covid and covid etc. there could be additional delay.
Collectors who are super strict about timeline, our Preorder and Subscription might not be suitable for you, please wait for in hands.
QUALITY CONTROL:
We provide “Standard Grade” for Preorder and Subscription. These pins are usually with less than 3 imperfection smaller than 1mm, undetectable within arm length. We are on the strict side, pins are graded under high beam light, and we inclined to get our standard grades as close to collector grades as possible.
However, please understand for very complicated pins, it’s unlikely to be completely perfect without and flaw at all. Enamel pins are handcrafted products, every single one is slightly different, they might not be suitable for super perfectionists.
SHIPPING:
Please select correct shipment to your country of residence.
We highly recommend tracked shipping for higher valued LE pins as replacement pins may not be available.
This is the first design from our “Old School Princess Nouveau Bijoux Collection” featuring popular classic princesses and heroines from our Childhood Fairytale Story line-up From Andersen Fairy Tales and Grmm’s Fairy Tales.
This collection will consist 6 scenes for book loving princess
Pins from this collection will have Art Nouveau as key style, incorporating gothic/baroque/Rococo/Plique-a-jour/Sculpting etc.
They will be on average about 4.5” to 5” Pin-on-Pin with 3D Sculpted Mould.
On top of traditional enamel pin technique, we may also incorporate other special effects creatively to achieve collectable deluxe art piece.
PRODUCTION VOLUME:
LE45 for each variant (20/variant available at preorder)
SPECIFICATION:
4,53” (11.5cm)
3D Sculpted Pin-on-Pin
Bi-Colour Plated
Stainless Effect
Sandblasted
Glitters
Silkscreen Printing
Back Stamp
*Bonus techniques as additional surprise (we will not charge preorder and subscription collector bonus techniques)
DISCLAIMER:
We are artists who draw from scratch and design our own art into pinart as well as vector proofing them. In terms of designs with 3D effects, we also make 3D modelling.
Pre-colour filing line-art vector file is always verified by our long term cooperating menus before any design reveal. All of our design reveals are pin arts with only effects we are confident of achieving in the final products. We may upgrade final effects when new tech is achieved through our constant R&D.
PRODUCTION TIME:
We start to make vector files prior to the preorder to save time. Our LE pins will usually take 2 to 3 months to complete. But with extra cautious, please consider 6 MONTHS as normal guideline time of fulfilment (Shipped out with either tracking number or proof of shipment if untracked is selected).
We’ll closely post production progress to keep you updated, and updating guideline timeline based on progress where necessary.
Potential delay is mainly due to following reasons:
2 are OCD perfectionist who want to make every little part perfect, some more complex techniques might take longer for colour fitting or size fitting, hence lead to delay. We will closely monitor and update progress for each product.
Some uncontrollable external circumstances can change, hence cause under satisfied batch from our long-term cooperating manu. Al though we strictly stick to the high quality manus, which has low flaw rate. But even with them we’ve encountered underperformance due to factory surrounding change, e.g. construction, which generates dust which is lethal to pin production.
Pins, therefore, will have to be fixed or remade before we can deliver.
International shipping is not within our control once they are out of our hands. In case of covid and covid etc. there could be additional delay.
Collectors who are super strict about timeline, our Preorder and Subscription might not be suitable for you, please wait for in hands.
QUALITY CONTROL:
We provide “Standard Grade” for Preorder and Subscription. These pins are usually with less than 3 imperfection smaller than 1mm, undetectable within arm length. We are on the strict side, pins are graded under high beam light, and we inclined to get our standard grades as close to collector grades as possible.
However, please understand for very complicated pins, it’s unlikely to be completely perfect without and flaw at all. Enamel pins are handcrafted products, every single one is slightly different, they might not be suitable for super perfectionists.
SHIPPING:
Please select correct shipment to your country of residence.
We highly recommend tracked shipping for higher valued LE pins as replacement pins may not be available.
This is the first design from our “Old School Princess Nouveau Bijoux Collection” featuring popular classic princesses and heroines from our Childhood Fairytale Story line-up From Andersen Fairy Tales and Grmm’s Fairy Tales.
This collection will consist 6 scenes for book loving princess
Pins from this collection will have Art Nouveau as key style, incorporating gothic/baroque/Rococo/Plique-a-jour/Sculpting etc.
They will be on average about 4.5” to 5” Pin-on-Pin with 3D Sculpted Mould.
On top of traditional enamel pin technique, we may also incorporate other special effects creatively to achieve collectable deluxe art piece.
PRODUCTION VOLUME:
LE45 for each variant (20/variant available at preorder)
SPECIFICATION:
4,53” (11.5cm)
3D Sculpted Pin-on-Pin
Bi-Colour Plated
Stainless Effect
Sandblasted
Glitters
Silkscreen Printing
Back Stamp
*Bonus techniques as additional surprise (we will not charge preorder and subscription collector bonus techniques)
DISCLAIMER:
We are artists who draw from scratch and design our own art into pinart as well as vector proofing them. In terms of designs with 3D effects, we also make 3D modelling.
Pre-colour filing line-art vector file is always verified by our long term cooperating menus before any design reveal. All of our design reveals are pin arts with only effects we are confident of achieving in the final products. We may upgrade final effects when new tech is achieved through our constant R&D.
PRODUCTION TIME:
We start to make vector files prior to the preorder to save time. Our LE pins will usually take 2 to 3 months to complete. But with extra cautious, please consider 6 MONTHS as normal guideline time of fulfilment (Shipped out with either tracking number or proof of shipment if untracked is selected).
We’ll closely post production progress to keep you updated, and updating guideline timeline based on progress where necessary.
Potential delay is mainly due to following reasons:
2 are OCD perfectionist who want to make every little part perfect, some more complex techniques might take longer for colour fitting or size fitting, hence lead to delay. We will closely monitor and update progress for each product.
Some uncontrollable external circumstances can change, hence cause under satisfied batch from our long-term cooperating manu. Al though we strictly stick to the high quality manus, which has low flaw rate. But even with them we’ve encountered underperformance due to factory surrounding change, e.g. construction, which generates dust which is lethal to pin production.
Pins, therefore, will have to be fixed or remade before we can deliver.
International shipping is not within our control once they are out of our hands. In case of covid and covid etc. there could be additional delay.
Collectors who are super strict about timeline, our Preorder and Subscription might not be suitable for you, please wait for in hands.
QUALITY CONTROL:
We provide “Standard Grade” for Preorder and Subscription. These pins are usually with less than 3 imperfection smaller than 1mm, undetectable within arm length. We are on the strict side, pins are graded under high beam light, and we inclined to get our standard grades as close to collector grades as possible.
However, please understand for very complicated pins, it’s unlikely to be completely perfect without and flaw at all. Enamel pins are handcrafted products, every single one is slightly different, they might not be suitable for super perfectionists.
SHIPPING:
Please select correct shipment to your country of residence.
We highly recommend tracked shipping for higher valued LE pins as replacement pins may not be available.