[Preorder-ends, Awaiting In-hands] Anime Kamikakushi Chibi Couple Latte Enamel Pin
*In Production*
production start post preorder right away
SPECIFICATION
>Size: 2.75” (Approximately: 7cm)
>Material: Zinc Alloy
>Effects:
Stainglass Effects/Plique-a-Jour
Gradient Pearl
Glitters/Fine Glitters
Semi Transparent Enamel Sandblast/ Pearl Swirl
Silhoutte
>Plating and Finishing
Classic Latte Variant : Gold Plated, Hard Enamel
Sakura Latte Variant: Gold Plated, Hard Enamel
Lavender Latte Variant: Rainbow Plated, Soft Enamel+Epoxy
PRODUCTION VOLUME:
Final number, including quality control spare and in hand drop, will be sealed and announced after Preorder. These variants will retire and will not be restocked.
DISCLAIMER:
We are artists who draw from scratch and design our own art into pinart as well as vector proofing them. In terms of designs with 3D effects, we also make 3D modelling.
Pre-colour filing line-art vector file is always verified by our long term cooperating menus before any design reveal. All of our design reveals are pin arts with only effects we are confident of achieving in the final products. We may upgrade final effects when new tech is achieved through our constant R&D.
PRODUCTION TIME:
We start to make vector files prior to the preorder to save time. Our Preorder pins will usually take 2 to 3 months to complete. But with extra cautious, please consider 6 MONTHS as within normal guideline time of fulfilment (Shipped out with either tracking number or proof of shipment if untracked is selected).
We’ll closely post production progress to keep you updated, and updating guideline timeline based on progress where necessary.
Potential delay is mainly due to following reasons:
2 We are OCD perfectionist who want to make every little part perfect, some more complex techniques might take longer for colour fitting or size fitting, hence lead to delay. We will closely monitor and update progress for each product.
Some uncontrollable external circumstances can change, hence cause under satisfied batch from our long-term cooperating manu. Al though we strictly stick to the high quality manus, which has low flaw rate. But even with them we’ve encountered underperformance due to factory surrounding change, e.g. construction, which generates dust which is lethal to pin production.
Pins, therefore, will have to be fixed or remade before we can deliver.
International shipping is not within our control once they are out of our hands. In case of covid and covid etc. there could be additional delay.
Collectors who are super strict about timeline, our Preorder and Subscription might not be suitable for you, please wait for in hands.
QUALITY CONTROL:
We provide “Standard Grade” for Preorder and Subscription. These pins are usually with less than 3 imperfection smaller than 1mm, undetectable within arm length. We are on the strict side, pins are graded under high beam light, and we inclined to get our standard grades as close to collector grades as possible.
However, please understand for very complicated pins, it’s unlikely to be completely perfect without and flaw at all. Enamel pins are handcrafted products, every single one is slightly different, they might not be suitable for super perfectionists.
SHIPPING:
Please select correct shipment to your country of residence. If selected wrongly, Paypal invoices including process fee will be sent.
We highly recommend tracked shipping as replacement pins may not be available.
*In Production*
production start post preorder right away
SPECIFICATION
>Size: 2.75” (Approximately: 7cm)
>Material: Zinc Alloy
>Effects:
Stainglass Effects/Plique-a-Jour
Gradient Pearl
Glitters/Fine Glitters
Semi Transparent Enamel Sandblast/ Pearl Swirl
Silhoutte
>Plating and Finishing
Classic Latte Variant : Gold Plated, Hard Enamel
Sakura Latte Variant: Gold Plated, Hard Enamel
Lavender Latte Variant: Rainbow Plated, Soft Enamel+Epoxy
PRODUCTION VOLUME:
Final number, including quality control spare and in hand drop, will be sealed and announced after Preorder. These variants will retire and will not be restocked.
DISCLAIMER:
We are artists who draw from scratch and design our own art into pinart as well as vector proofing them. In terms of designs with 3D effects, we also make 3D modelling.
Pre-colour filing line-art vector file is always verified by our long term cooperating menus before any design reveal. All of our design reveals are pin arts with only effects we are confident of achieving in the final products. We may upgrade final effects when new tech is achieved through our constant R&D.
PRODUCTION TIME:
We start to make vector files prior to the preorder to save time. Our Preorder pins will usually take 2 to 3 months to complete. But with extra cautious, please consider 6 MONTHS as within normal guideline time of fulfilment (Shipped out with either tracking number or proof of shipment if untracked is selected).
We’ll closely post production progress to keep you updated, and updating guideline timeline based on progress where necessary.
Potential delay is mainly due to following reasons:
2 We are OCD perfectionist who want to make every little part perfect, some more complex techniques might take longer for colour fitting or size fitting, hence lead to delay. We will closely monitor and update progress for each product.
Some uncontrollable external circumstances can change, hence cause under satisfied batch from our long-term cooperating manu. Al though we strictly stick to the high quality manus, which has low flaw rate. But even with them we’ve encountered underperformance due to factory surrounding change, e.g. construction, which generates dust which is lethal to pin production.
Pins, therefore, will have to be fixed or remade before we can deliver.
International shipping is not within our control once they are out of our hands. In case of covid and covid etc. there could be additional delay.
Collectors who are super strict about timeline, our Preorder and Subscription might not be suitable for you, please wait for in hands.
QUALITY CONTROL:
We provide “Standard Grade” for Preorder and Subscription. These pins are usually with less than 3 imperfection smaller than 1mm, undetectable within arm length. We are on the strict side, pins are graded under high beam light, and we inclined to get our standard grades as close to collector grades as possible.
However, please understand for very complicated pins, it’s unlikely to be completely perfect without and flaw at all. Enamel pins are handcrafted products, every single one is slightly different, they might not be suitable for super perfectionists.
SHIPPING:
Please select correct shipment to your country of residence. If selected wrongly, Paypal invoices including process fee will be sent.
We highly recommend tracked shipping as replacement pins may not be available.
*In Production*
production start post preorder right away
SPECIFICATION
>Size: 2.75” (Approximately: 7cm)
>Material: Zinc Alloy
>Effects:
Stainglass Effects/Plique-a-Jour
Gradient Pearl
Glitters/Fine Glitters
Semi Transparent Enamel Sandblast/ Pearl Swirl
Silhoutte
>Plating and Finishing
Classic Latte Variant : Gold Plated, Hard Enamel
Sakura Latte Variant: Gold Plated, Hard Enamel
Lavender Latte Variant: Rainbow Plated, Soft Enamel+Epoxy
PRODUCTION VOLUME:
Final number, including quality control spare and in hand drop, will be sealed and announced after Preorder. These variants will retire and will not be restocked.
DISCLAIMER:
We are artists who draw from scratch and design our own art into pinart as well as vector proofing them. In terms of designs with 3D effects, we also make 3D modelling.
Pre-colour filing line-art vector file is always verified by our long term cooperating menus before any design reveal. All of our design reveals are pin arts with only effects we are confident of achieving in the final products. We may upgrade final effects when new tech is achieved through our constant R&D.
PRODUCTION TIME:
We start to make vector files prior to the preorder to save time. Our Preorder pins will usually take 2 to 3 months to complete. But with extra cautious, please consider 6 MONTHS as within normal guideline time of fulfilment (Shipped out with either tracking number or proof of shipment if untracked is selected).
We’ll closely post production progress to keep you updated, and updating guideline timeline based on progress where necessary.
Potential delay is mainly due to following reasons:
2 We are OCD perfectionist who want to make every little part perfect, some more complex techniques might take longer for colour fitting or size fitting, hence lead to delay. We will closely monitor and update progress for each product.
Some uncontrollable external circumstances can change, hence cause under satisfied batch from our long-term cooperating manu. Al though we strictly stick to the high quality manus, which has low flaw rate. But even with them we’ve encountered underperformance due to factory surrounding change, e.g. construction, which generates dust which is lethal to pin production.
Pins, therefore, will have to be fixed or remade before we can deliver.
International shipping is not within our control once they are out of our hands. In case of covid and covid etc. there could be additional delay.
Collectors who are super strict about timeline, our Preorder and Subscription might not be suitable for you, please wait for in hands.
QUALITY CONTROL:
We provide “Standard Grade” for Preorder and Subscription. These pins are usually with less than 3 imperfection smaller than 1mm, undetectable within arm length. We are on the strict side, pins are graded under high beam light, and we inclined to get our standard grades as close to collector grades as possible.
However, please understand for very complicated pins, it’s unlikely to be completely perfect without and flaw at all. Enamel pins are handcrafted products, every single one is slightly different, they might not be suitable for super perfectionists.
SHIPPING:
Please select correct shipment to your country of residence. If selected wrongly, Paypal invoices including process fee will be sent.
We highly recommend tracked shipping as replacement pins may not be available.